Euras gel type 10+

  • The Deutsche Ba hn has tested polyacrylic gels developed by some companies and discovered it's pH instability and tendency to transition to low values (acid reaction)
  • Our Gel type 10+ was tested for sealing of joints in tunnels in the Wissbau, Essen, Germany and for applying in protection of steel wire ropes for pre-stressing in the Institute for Materia Is, Serbia
  • Maximum pH value reached was 12.93 and usual value is pH>10.30
  • Euras gel type B has pH of 8.50 to 9.00 and it is a carrier of agents that achieve specific tasks
  • It is used for removing water and implement permanent passivation of reinforcing steel

Euras gel type -20

A new type of gel injection, offering all the usual features, manages to maintain resistance to freezing to -200C.

  • It is used to eliminate harmful effects of very low temperatures on the implemented gel and its ability to increase volume.
  • It is applied in shallow groundwater areas where freezing is expected.
  • It is used for repair of drains in public garages and flat roofs over unheated spaces, entrance areas of tunnels, etc.
  • All Euras gels are made on inorganic basis and are harmless to the environment, groundwaters particulary.

Euras injection mortar

We have developed a new type mortar injection (with or without use of cement) that is used for contact and injecting underground structures, which, unlike other materials of the group during injection, remains homogeneous , without
changing water-cement ratio and without decomposition, specific gravity of 2.10 t/m3. This procedure enables mortar to achieve, except for contact constructive functions, also a waterproofing function from the first moment of its placing.

  • This is the grout that works on the laws of hydraulic systems
  • It is a composition of carrier gel and mineral aggregates, with or without the addition of cement
  • It displaces water from a given area, not dissolving and mixing with surrounding water
  • The final compressive strength is almost unimpaired relative to the value of same material without the addition of carrier gel
  • It can be injected underwater, both static or flowing (fresh or sea) without being degraded.
  • It is used for contact grouting of tunnels in areas of higher water flow and achieves the effect of immediate insulation
  • Currently it is in the reconstruction program as an a It ern ative grouting solution for consolidation of reservoir of hydro power plant Visegrad, Bosnia where water losses are around 15m3/ sec.

TECHNICAL DATA

Description: Single component gel
Basis: Mineral, alcal
Color: Mint
Spec. Weight: 1,1
Toxic hazard: None (see report)
Corrosive hazard: None

Gel formula and technology is an EURAS TECHNOLOGY (Cyprus) Ltd. Registered patent.

 

 

 

srbPresentation CZPresentation FR

Go to top